ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 68)

ZyWALL 2 Series User’s Guide
4-6 System
Figure 4-3 Password
The following table describes the fields in this screen.
Table 4-3 Password
LABEL DESCRIPTION
Old Password Type the default password or the existing password you use to access the system
in this field.
New Password Type the new password in this field.
Retype to Confirm Type the new password again in this field.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.
4.6 Pre-defined NTP Time Servers List
The ZyWALL uses the following pre-defined list of NTP time servers if you do not specify a time server or it
cannot synchronize with the time server you specified.
The ZyWALL can use this pre-defined list of time servers regardless of the Time
Protocol you select.
When the ZyWALL uses the pre-defined list of NTP time servers, it randomly selects one server and tries to
synchronize with it. If the synchronization fails, then the ZyWALL goes through the rest of the list in order
from the first one tried until either it is successful or all the pre-defined NTP time servers have been tried.