ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 367)

ZyWALL 2 Series User’s Guide
WAN and Dial Backup Setup 23-1
Chapter 23
WAN and Dial Backup Setup
This chapter describes how to configure the WAN using menu 2 and dial-backup using menus 2.1
and 11.1.
23.1 Introduction to WAN
This chapter explains how to configure settings for your WAN port.
From the main menu, enter 2 to open menu 2.
Figure 23-1 MAC Address Cloning in WAN Setup
The following table describes the fields in this screen.
Table 23-1 MAC Address Cloning in WAN Setup
FIELD DESCRIPTION EXAMPLE
MAC Address
Assigned By Press [SPACE BAR] and then [ENTER] to choose one of two methods
to assign a MAC Address. Choose Factory Default to select the factory
assigned default MAC Address. Choose IP address attached on LAN
to use the MAC Address of that workstation whose IP you give in the
following field.
IP address
attached on
LAN
Menu 2 - WAN Setup
MAC Address:
Assigned By= Factory default
IP Address= N/A
Dial-Backup:
Active= No
Phone Number=
Port Speed= 9600
AT Command String:
Init=
Edit Advanced Setup= No
Press ENTER to Confirm or ESC to Cancel: