Oritron Dionex Ion Chromatography System ICS-2100 - Manual (Page 84)

ICS-2100 Ion Chromatography System
72
Doc. 065291-01 3/09
The table below lists the most frequently observed ICS-2100 error messages. For
troubleshooting assistance, refer to the page indicated in the table.
Alarms and Error Conditions See
Auxiliary power supply disconnected page 74
Auxiliary power supply over current page 74
Auxiliary power supply over voltage page 75
Auxiliary power supply stopped for zero flow page 75
Column heater exceeds safe temperature page 75
Column heater open circuit page 76
Column heater short circuit page 76
CR-TC over current page 76
CR-TC stopped for zero flow rate page 77
Degas calibration failed page 77
EGC board not present page 77
EGC-1 calibration error page 78
EGC-1 disconnected error page 78
EGC-1 invalid concentration page 78
EGC-1 invalid concentration vs. flow rate page 78
EGC-1 invalid flow rate page 79
EGC-1 over current page 79
EGC-1 over voltage page 79
EGC-2 calibration error page 78
EGC-2 disconnected error page 78
EGC-2 invalid concentration
EGC-2 invalid concentration vs. flow rate page 78
EGC-2 invalid flow rate page 79
EGC-2 over current page 79
EGC-2 over voltage page 79
Hardware not present page 80
Leak sensor wet page 80
Load/Inject valve error page 80
Table 4-5. Alarms and Error Messages Summary