Oritron Dionex Ion Chromatography System ICS-2100 - Manual (Page 233)

B • Touch Screen Operation
Doc. 065291-01 3/09
221
2. Touch the down arrow next to the field you want to change. A list of
the available status parameters appears (see Figure B-12 ).
3. Touch the parameter you want to display.
4. When finished, touch the Apply button.
B.6.2 Status Parameter Details
Figure B-12. Status Page Parameter List
Status Parameter Description
Eluent time The number of hours the eluent supply will last, if the pump runs
continuously at the current flow rate.
Flow rate The actual flow rate currently output by the pump.
EGC1 conc
EGC2 conc The actual concentration of eluent currently being generated by the
EluGen cartridge (EGC1 or EGC2).
AUX PS The actual auxiliary power supply current in mA.
This field replaces the
EGC2 conc field when the EGC-2 power
supply is configured as an auxiliary power supply.
Suppressor The actual current applied to the suppressor.
Elapsed time The number of hours since the last injection.