Adding a server, Prerequisites, Adding a server prerequisites adding a server – Nortel Networks Sun Fire V100 User Manual
Page 99
MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide
Copyright © 2006 Nortel Networks
Adding a server
Prerequisites
The System Management Console has been successfully installed and
started.
Adding a server
Use this procedure to add each of your servers.
Procedure 26 Adding a server
At the System Management Console,
1
Select Sites->MgmtSite->Servers.
2
Right click on the Servers folder.
3
Select Add->General.
4
Use the following system server fields to complete the General
server window that appears.
Note: The shaded rows indicate values that must be
addressed by the installer.
System
server field
Customer defines
Example
Server Name
The name that will appear from the
management console.
Location
Optional field. Describes the physical
location of the server.
default
Latitude
Optional field. Describes the latitudinal
coordinates of the location of this server.
default
Longitude
Optional field. Describes the longitudinal
coordinates of the location of this server.
default