Verifying the ipcm/prov/wcm installation – Nortel Networks Sun Fire V100 User Manual
Page 181
MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide
181
Copyright © 2006 Nortel Networks
3
The third 192 address should reflect the dmfe1 interface followed
by the hostname concatenated with ‘dmfe1.’
Procedure 55 Verifying defaultroute file
[@mcsappsvr]/export/home/nortel:=> cat /etc/defaultrouter
192.168.14.1
1
The only address in this file defines your default gateway route
(your router). If this file is empty and the machine is rebooted,
then you will not have network access to your other MCS
machines.
Verifying the IPCM/Prov/WCM installation
The following commands are executed on the IPCM/Prov/WCM
SunFire V100 using PuTTY SSH into the machine logical IP address.
Example: Open a PuTTY SSH session to 192.168.14.41
Procedure 56 Verifying the IPCM/Prov/WCM
Log into the server as nortel/
1
After installing the MCS Base Platform System Software CDs
1-6, execute the following command to verify IP addressing.
@mcsipcmprovwcm]/export/home/nortel:=> ifconfig -a
lo0:
flags=1000849
mtu 8232 index 1 inet 127.0.0.1 netmask ff000000
dmfe0:
flags=9040843
192.168.14.42 netmask ffffff00 broadcast 192.168.14.255
groupname imspub
dmfe0:1:
flags=1000843
broadcast 192.168.14.255
dmfe1:
flags=69040843
1500 index 3 inet 192.168.14.43 netmask ffffff00 broadcast
192.168.14.255 groupname imspub
Notice several items: