Installing disk 6 (mgmtsvr and acctmgr only) – Nortel Networks Sun Fire V100 User Manual
Page 65

MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide
Copyright © 2006 Nortel Networks
Installing Disk 6 (MgmtSvr and AcctMgr
only)
Approximate time estimate = 30 minutes
Procedure 18 Installing CD 6
At the management pc,
1
Place CD6 in the CD-ROM drive and press Enter at the prompt.
Note: CD6 will eject from the CD-ROM when installed.
2
After the reboot, log in (using the B/Serial port) and change the
passwords for the sysadmin, root, and nortel users.
ATTENTION
CD6 must be installed on the MgmtSvr and on the AcctMgr
machines only. If you do not install CD6, you will not be able to
deploy or start the secondary MgmtSvr or AcctMgr.