Nortel Networks Sun Fire V100 User Manual
Page 69
MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide
69
Copyright © 2006 Nortel Networks
Refer to this table when entering the following command:
cd [space] /IMS/ora_cds/Disk1 [Enter]
./Oracle_Install PRIMARY
/tmp/oracleinstall.log
11
Enter the password oracle at the Oracle prompt. [Enter]
12
Retype the password: oracle [Enter]
13
Select the database configuration:
1) Enterprise
2) Carrier
Accept the default [1]
[Enter]
14
Is the database replicated [N]?
Accept the default [N]
[Enter]
15
You will then see a confirmation screen. If the information on the
screen is correct, type Y. Otherwise, type N and make the
changes.
Note: At this point, the program runs a check sum and untars
the files to the local directory. Approximate time: 30 - 45
minutes.
ATTENTION
In step
you will enter the hostname twice. The
sec_db_hostname is the same as the pri_db_hostname for a
4-server non-redundant configuration.
Prompt
Definition
Enter
pri_db_hostname
There is only one
hostname for a
4-server configuration.
Hostname of the
database server, for
example, db.
sec_db_hostname
Since there is no
secondary server,
enter again the
pri_db_hostname
(Hostname of the
database server).
Re-enter hostname of
the database server.