Installing cd2 – Nortel Networks Sun Fire V100 User Manual
Page 46
NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006
46
Copyright © 2006 Nortel Networks
You will see the message Creating disk profile for
standard
21
You will see the following message:
*********************************************
Choose Application configuration:
1) AppSvr/IPCM/Websvr/WCM
2) Management/Accounting
3) Oracle/DB
**********************************************
Select your required server type, then press Enter.
Note: Select number 1 for the IPCM, SIP Application Module,
Web Client Manager, Provisioning Module, Web Client
Manager, and H.323 Gatekeeper.
You will see the message Creating disk profile for
22
The install script will begin executing. The system will reboot
upon completion of the install script. Wait until you receive the
login prompt.
23
You will be prompted to type in the root password twice. The
password will not appear on the screen when you type. If you do
not want a root password, press Enter twice. Press Enter to
continue.
Note: The CD will eject from the CD-ROM. The system then
requests that you insert CD2.
Installing CD2
Approximate time estimate = 15 minutes
ATTENTION
Make the following selection very carefully. If you make a mistake
at this point, you will need to start over, beginning with
. The selection of the number depends
on the server type.
ATTENTION
If you are not prompted for CD2, contact support.