Installing disk 4, Database servers (dbsvr), Installing disk 4 database servers (dbsvr) – Nortel Networks Sun Fire V100 User Manual
Page 49
MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide
Copyright © 2006 Nortel Networks
Installing Disk 4
Database servers (DBSvr)
Approximate time estimate = 30 minutes
Procedure 13 Installing CD4
At the management pc,
1
Place CD4 in the CD-ROM drive and press Enter to continue.
WAIT until you see the following statement appear:
”You are now configuring the NTP time source for
this server. The servers which run the
Management and Accounting service will be the
source. You will need to provide the Machine
Logical IP Address of each server. If running
simplex, provide the same address twice.”
2
Press Enter to continue.
3
You will see the following message: "Enter the machine
logical IP address of the management server."
ATTENTION
Refer to the CSI datasheet for such information as hostname, IP
addresses, and subnet masks.
ATTENTION
The following sections describe installing CD4 according to the
specific server type. Please note that there are some small, but
very important, differences in the installation of the three types of
servers.