Installing and configuring the oracle monitor, Prerequisites, Procedures – Nortel Networks Sun Fire V100 User Manual
Page 139
MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide
Copyright © 2006 Nortel Networks
Installing and configuring the Oracle
Monitor
Prerequisites
Make sure the following are completed successfully:
•
The System Management Console has been installed and started.
•
A server definition has been created for the Oracle Monitor.
Procedures
Procedure 40 Adding the Oracle Monitor (Small) to the System
Management Console
At the System Management Console,
1
Select Sites->MgmtSite->Servers->DBSvr.
2
Click on the plus sign next to the server to which you are adding
the component.
3
Right click on the Components folder.
4
Select Add -> Component.
5
A list of component loads appears in the Load List window.
Select the latest Small load.
6
Click Apply. Wait for the new component and the component
configuration window to appear.
7
Enter a label (maximum six [6] characters) in the Service
Component Name field at the bottom of the configuration
ATTENTION
Do not click Apply until you have finished configuring the
component.