Nortel Networks Sun Fire V100 - Manual (Page 122)

NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006
122 Copyright © 2006 Nortel Networks
4 Use the values from the table that follows to complete the SIP
TCF Base tab parameters.
The shaded rows indicate values that must be addressed by the
installer.
5 Use the values from the table that follows to complete the
Conference Service tab parameters.
The shaded rows indicate values that must be addressed by the
installer.
6 Use the values from the following table to enter into the In
Memory Database tab parameters.
Table 21 SIP TCF Base tab
Parameter Recommended value Notes Example
Transport Config UDP=IP of IPCM
Server>:5070:optional;
TCP=IP of IPCM
Server>:5070:optional Replace each
instance of 0.0.0.0
in the UDP and
TCP string with the
machine logical IP
address of the
IPCM server UDP=192.168
.14.41:5070:o
ptional;TCP=1
92.168.14.41:
5070:optional
Invite Timer 128000 default
Maximum Number
of Redirections 5 default
Initial Maximum Hop
Value 20 default
Table 22 Conference Service tab
Parameter
Recommended
Value
Notes Example
Conf Server URL sip:conference default