Nortel Networks Sun Fire V100 User Manual

Page 75

MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide

Please enter the correct number of the load to
deploy:

Example
[@mcsmgmt]/export/home/nortel:=>
mgmtdeploy.pl

Obtaining input required to deploy and
configure the mgmtsvr bundle

Please enter all IP addresses in
dot-notation format

==========================================

Querying DSM for available loads

Select a mgmtsvr load from the following list

[1] mgmtsvr_all-micro_ims_3.0_buildxxxx
[2] mgmtsvr_all-small_ims_3.0_buildxxxx
[3] mgmtsvr_all_ims_3.0_buildxxx

Please enter the number [1] of the load to
deploy: 2

Is the database replicated?

N [Enter]

Enter Machine Logical IP Address - Primary DB:
server>

Example: 192.168.14.21

Enter the Machine Logical IP Address - Mgmtsvr:
server>

ATTENTION

When selecting the management server load, always select the
load that contains the word ‘small’ in it. If the non-small load is
selected, the installer will receive an Out Of Memory error.

The server load names are:

• mgmtsvr_all-mico-ims — for a 2-server installation.

• mgmtsvr_all-small-ims — for a 4-server or an 8-server V100

installation.

• mgmtsvr_all_ims — for an 8-server N240 installation.