Nortel Networks Sun Fire V100 User Manual
Page 114
NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006
114
Copyright © 2006 Nortel Networks
14
Use the values from the following table to enter into the Overload
Controls tab parameters.
Service
Parameter:
Label
Private_Service_Address
not applicable
default
Value:
default
Service
Parameter:
Label
CallPark.TokenRange
Range is 1-80
characters
default
Value:
This is the value to enter
if you have the ability to
park a call. For more
information, see the
MCS SIP Application
Module Basics
(NN10259-111)
document.
default
Table 15 Server Properties tab (Sheet 2 of 2)
Parameter
Recommended value
Notes
Example
Table 16 Overload Controls tab
Parameter
Recommended
value
Notes
Example
Mem Polling Interval (sec)
10
default
Minor Alarm Threshold (%)
80
default
Major Alarm Threshold (%)
85
default
Critical Alarm Threshold (%)
90
default
Call queue high threshold
70
70
Call queue low threshold
40
40
Other queue high threshold
40
default
Other queue low threshold
5
default
Database queue high threshold
40
40