Nortel Networks Sun Fire V100 User Manual

Page 26

NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006

Figure 6 Sun Fire V100 server network callouts

Note 1: If the network is down, or the server needs to be
configured or restarted, use the console port A.

By default from manufacturing, serial port A is the only active
serial port.

Note 1: The cables with part numbers A0500465 or
NTVW01IM are serial cables.

Note 2: The P1 end goes to the V100 server and the P2 end
goes to the MRV terminal server.

Figure 7 P1 and P2 custom cable connections to terminal server

See note

Note: This cable is only connected in order to configure the terminal server.

Following configuration, remove the cable.