Nortel Networks Sun Fire V100 - Manual (Page 76)

NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006
76 Copyright © 2006 Nortel Networks
Example: 192.168.14.11
9 Will a Motorola SAM16 server (SIP PriGwy or SIP
Audio Svr) be deployed? [Y/N]
Always answer N [Enter] even if you have a third-party
gateway.
Note: Information obtained for deploying the Sysmgr
appears.
10 Is the above data correct? [Y]
Y [Enter]
11 Start up the SysMgr and TSS processes? [Y]
Answer Y [Enter]
Sysmgr deployment verification
After completing step 11 above, the screen will display deployment
information. Notice that the script waits 30 seconds between process
executions. The script is starting three processes that must be running
in order to continue MCS load deployment.
The three processes can be verified by opening a PuTTY SSH session
to the management / accounting server.
Example: Open a PuTTY SSH session to 192.168.14.11
Procedure 22 Verifying the Sysmgr deployment
At the management pc,
1 Using PuTTY SSH, log into management / accounting server as
nortel / .
2 Execute the following command to verify processes:
[@mcsmgmt] /export/home/nortel:=> meinit -p
Rel3 NTme_pids mgmtsvr mgmtsvr.3 6601
Rel3 NTme_pids tsscma tsscma.5 6496
Rel3 NTme_pids tssfpma tssfpma.6 6559
The results of the meinit command should display three
processes along with their process ids.