Deploying and starting the sysmgr, Prerequisites – Nortel Networks Sun Fire V100 User Manual

Page 73

Text mode
Original mode

MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide

Deploying and starting the Sysmgr

Prerequisites

The dbdeploy.pl script is successfully deployed on the database.

Deploy the Sysmgr for a non-redundant configuration. The operator
logs into the machine logical IP address of the management server. At
the UNIX prompt, the operator the uses the script mgmtdeploy.pl to
deploy and start the Sysmgr. This process is described in the following
section.

Deploying and starting the Sysmgr

Procedure 21 Deploying and starting the Sysmgr

At the management pc,

Using PuTTY SSH, log into the management / accounting
server:

ATTENTION

Refer to the customer-specific information for hostname, IP
addresses, subnet masks, and so on.