Nortel Networks Sun Fire V100 - Manual (Page 108)

NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006
108 Copyright © 2006 Nortel Networks
At the System Management Console,
1 Use the values from the following table to enter into the
Authentication tab parameters.
Procedure 32 Configuring the SIP Application Module tabs
ATTENTION
Do not click Apply until you have FINISHED configuring all the
tabs.
Table 3 Authentication tab (Sheet 1 of 2)
Parameter
Recommended
value
Notes Example
Authorized SIP Nodes other trusted
application servers,
conference servers,
and gateways this
application module
interacts with. A
trusted relationship
implies that this
endpoint will not be
authenticated by the
application module.
Also, trust can be
applied to nodes
that cannot perform
user authentication
such as conference
servers and
gateways.> Enter
addresses
individually. Enter IPs of any
gateways or
conference servers
being used. Also,
enter the public
machine logical IPs
of any IPCMs.
Note: Do not put in
any WiCM server
addressess, since
they are not trusted
nodes.
Private Key MCP default