Verification procedures, Sun fire v100 h.323 gatekeeper server verification – Nortel Networks Sun Fire V100 User Manual
Page 168
![background image](/manuals/192358/168/background.png)
NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006
168
Copyright © 2006 Nortel Networks
Gatekeeper. This value is added to the SIP URI and is
required for the MCS 5100 H.323 Gatekeeper to route calls
to the appropriate H.323 endpoint. In this example, the
gateway is
Example
Gateway host:
enterprise.com;maddr=47.104.11.195:5070;h
323_endpoint=Harry-GW1
Gateway type: Harry-GW1-on-gatekeeper3
6
Calls can now route to and from the SIP applications and H.323
Gatekeeper and endpoints.
7
At this point administrators should configure their dialing plan
support.
Verification procedures
Sun Fire V100 H.323 Gatekeeper server verification
The following commands are executed on the AppSvr V100 using
PuTTY SSH into the machine logical IP address.
Example: Open a PuTTY SSH session to 120.120.12.34
Procedure 49 Verifying the H.323 Gatekeeper
At the management pc,
1
Log into the server as nortel/
2
After installing the MCS Base Platform System Software CDs
1-6, execute the following command to verify IP addressing.
@mcsappsvr]/export/home/nortel:=> ifconfig -a
lo0:
flags=1000849
mtu 8232 index 1 inet 127.0.0.1 netmask ff000000
dmfe0:
flags=9040843
120.120.12.32 netmask ffffff00 broadcast 120.120.12.255
groupname imspub
dmfe0:1:
flags=1000843
broadcast 120.120.12.255