Server configuration, Loading disks, Server configuration loading disks – Nortel Networks Sun Fire V100 User Manual
Page 18

NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006
18
Copyright © 2006 Nortel Networks
Server configuration
The following table shows the basic setup of the 4-server configuration.
Loading disks
MCS 5100 Release 3.0 Base Platform System SoftWare Kit
NTVW01AJ contains multiple copies of the same CDs to allow
simultaneous installation across servers. See
NTVW01BD disks to servers (with times), on page 19
for details. Nortel
recommends that all servers with the same CD numbers be installed at
the same time to reduce installation time.
As shown in
Table 1, Mapping of Kit NTVW01BD disks to servers (with
, Disks 1-5 have four copies each. Disk 6 only needs to go on the
Management/Accounting server. There are six Oracle disks, with one
copy, going on the database server.
Table 0-1 4-server Sun Fire* V100 Solaris configuration
Configuration
Server type
Components
Sun Fire* V100
Management/Accounting
server
Active System Manager
Active Accounting Manager
Database server
Primary database
Oracle Monitor
SIP Application Module
(application server)
Active SIP Application Module
IPCM/Prov/WCM
(application server)
IPCM (S1)
Active Provisioning Module
Active WebClient Manager
iPlanetMonitor
UFTP Base Software