Nortel Networks Sun Fire V100 - Manual (Page 58)

NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006
58 Copyright © 2006 Nortel Networks
Enter ping target #1: 47.104.27.202
Enter ping target #2: 47.104.27.217
Enter ping target #3: 47.104.27.205
Enter ping target #4: 0.0.0.0
Example
for mcsappsvr
Enter ping target #1:
192.168.14.11[Enter]
Enter ping target #2: 192.168.14.21 [Enter]
Enter ping target #3: 192.168.14.41 [Enter]
Enter ping target #4: 0.0.0.0 [Enter]
Example
for mcsipcmprovwcm
Enter ping target #1:
192.168.14.11[Enter]
Enter ping target #2: 192.168.14.21 [Enter]
Enter ping target #3: 192.168.14.31 [Enter]
Enter ping target #4: 0.0.0.0 [Enter]
Note: Do not use this server's own IP address as a ping
target.
You will need to press Enter after you enter each IP address.
11 Is this IPMP group configuration acceptable
(Y/N)
Select Y and press Enter.
12 The default route IP address should appear. If correct, press
Enter. Otherwise, type in the correct IP address, then press
Enter.
Note: If your configuration does not include a router, then
enter the machine logical IP address of your server.
13 Do you intend to deploy the Web Server Module to this machine
(y,n)? Your answer to this question will affect whether or not
iPlanet is installed to this server or not.
Enter N [Enter] for the mcsappsvr.
Enter Y [Enter] for the mcsipcmprovwcm. This will install the
iPlanet Monitor (recommended)..
14 You are now configuring the Syslog Daemon. Press Enter to
continue.
15 Does the Management Server have a SysMgr Service Logical IP
Address [Y/N]? Select N.