Nortel Networks Sun Fire V100 User Manual
Page 188
NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006
188
Copyright © 2006 Nortel Networks
9
Follow the instructions for installing Disk 4 in this document.
After step
in the instructions for installing the DBSvr1 or
DVSvr2, you will see the following:
Follow the instructions below as shown in this message that
appears on your machine:
Starting Oracle Intelligent Agent....
Agent started
##################################################
# #
# Important Notice !!!!!! #
# #
# Your data base is replicated #
# To make the replication work you must execute the #
# following steps: #
# #
# (1) Log in as oracle to the replicated (other) DB #
# machine #
# #
# (2) issue the command #
# configure_replication #
# #
# (3) restart the database #
# #
##################################################
Press the Enter key to continue ----
Note: When you perform this procedure on an
IPCM/WCM/Prov machine, you will not be asked about
deploying a Provisioning Module to that server.
10
Execute the following steps before deploying any components.
To set the SysMgr and AcctMgr Service Logical IP addresses,
a
Log in as root to the Management server and type in the
following command:
#/usr/local/bin/Interface.pl add sysmgr