Automatic wire feeders, Automatic wire feeders options, con’t – Lincoln Electric AC-225C User Manual
Page 79

Automatic Wire Feeders Options, con’t.
See “Recommended General Options” pgs. 149-171 for descriptions.
LT-7 Tractor
Required Options
Weld Power Cables
See Weld Power Cables chart in the “Recommended General Options”
section.
K231-3/32
Contact Nozzle Assembly for 3/32" (2.4 mm) Wire
K231-1/8
Contact Nozzle Assembly for 1/8" (3.2 mm) Wire
K231-5/32
Contact Nozzle Assembly for 5/32" (4.0 mm) Wire
K231-3/16
Contact Nozzle Assembly for 3/16" (4.8 mm) Wire
K148A
Positive Contact Nozzle Assembly
for 3/32-1/8" (2.4-3.2 mm) Wire
K148B
Positive Contact Nozzle Assembly
for 5/32-3/16" (4.0-4.8 mm) Wire
General Options
KP2268-1
LT-7 Drive Roll .052"-1/16" (2 required)
KP2268-2
LT-7 Drive Roll .068"-3/32" (2 required)
KP2268-3
LT-7 Drive Roll 3/32"-3/16" (2 required)
KP2268-4
LT-7 Drive Roll .045"-.052" (2 required)
KP1984-1
Gun Tube Assembly, .068"-3/32", Incoming
KP1985-1
Gun Tube Assembly, 3/32"-3/16", Outgoing
KP1985-2
Gun Tube Assembly, 5/64"-3/32"-.068", Outgoing
Control Cables and Adapters
See Control Cables and Adapters chart in the “Recommended General
Options” section.
K149-3/32
Nozzle Extension for 3/32" (2.4 mm) Wire
K149-1/8
Nozzle Extension for 1/8" (3.2 mm) Wire
K149-5/32
Nozzle Extension for 5/32" (4.0 mm) Wire
K232
Horizontal Fillet and Lap Adapter Kit
K229
Flat Fillet Adapter Kit
K230
Butt Seam Guide Kit
K400
Track Conversion Kit
K277-1
Tiny Twinarc
®
Adapter Kit for Butt Seams
K277-2
Tiny Twinarc
®
Adapter Kit for Flat Fillets
K396
Track Section, 70 in (1.8 m)
K310
Flux Screen with Air-Driven Vibrator
K58
Magnetic Flux Screen Separator
K285
Concentric Flux Cone Assembly
—
Fume Extraction System
Power Feed
™
10A Controller
General Options
K2163-35
Weld Power Cable, Lug to Lug (4/0), 35 ft.
K2163-60
Weld Power Cable, Lug to Lug (4/0), 60 ft.
Weld Power Cables
See Weld Power Cables chart in the “Recommended General Options”
section.
K2311-1
Power Feed
™
10SM Motor Conversion Kit
K387
Tandem Arc Framework Assembly
K1543-8
ArcLink
®
/Linc-Net
™
Control Cable, 8 ft.
K1543-16
ArcLink
®
/Linc-Net
™
Control Cable, 16 ft.
K1543-25
ArcLink
®
/Linc-Net
™
Control Cable, 25 ft.
K1543-50
ArcLink
®
/Linc-Net
™
Control Cable, 50 ft.
K1543-100
ArcLink
®
/Linc-Net
™
Control Cable, 100 ft.
K390
Tandem Arc Wire Reels and Mountings
K389
Flux Hopper Assembly
K1785-12
Control Cable (Heavy Duty), 12 ft.
K1785-16
Control Cable (Heavy Duty), 16 ft.
K1785-25
Control Cable (Heavy Duty), 25 ft.
K1785-50
Control Cable, 14-pin, 50 ft.
K1785-100
Control Cable, 14-pin, 100 ft.
K231-5/64
Contact Nozzle Assembly for 5/64" (2.0 mm) Wire
K231-3/32
Contact Nozzle Assembly for 3/32" (2.4 mm) Wire
K231-1/8
Contact Nozzle Assembly for 1/8" (3.2 mm) Wire
K231-5/32
Contact Nozzle Assembly for 5/32" (4.0 mm) Wire
K231-3/16
Contact Nozzle Assembly for 3/16" (4.8 mm) Wire
K231-7/32
Contact Nozzle Assembly for 7/32" (5.6 mm) Wire
K226R
Contact Jaw Assembly for 1/8"-7/32" (3.2-5.6 mm) Wire
K148A
Positive Contact Nozzle Assembly for
3/32"-1/8" (2.4-3.2 mm) Wire
K148B
Positive Contact Nozzle Assembly for
5/32"-3/16" (4.0-4.8 mm) Wire
K149-3/32
Nozzle Extension for 3/32" (2.4 mm) Wire
K149-1/8
Nozzle Extension for 1/8" (3.2 mm) Wire
K149-5/32
Nozzle Extension for 5/32" (4.0 mm) Wire
K386
Narrow Gap Deep Groove Nozzle
K285
Concentric Flux Cone Assembly
K225
Sub Arc Twinarc
®
Nozzle for 5/64", 3/32"
&
1/8" Wire
K129-1/16
Tiny Twinarc
®
Assembly for 1/16" (1.6 mm) Wire
K129-5/64
Tiny Twinarc
®
Assembly for 5/64" (2.0 mm) Wire
K129-3/32
Tiny Twinarc
®
Assembly for 3/32" (2.4 mm) Wire
K281
Tiny Twinarc
®
Solid Wire Straightener
K325HCS
TC-3 High Capacity Travel Carriage,
Multiple Heads
&
Controls, 5-75 ipm
K325HCF
TC-3 High Capacity Travel Carriage,
Multiple Heads
&
Controls, 15-270 ipm
K299
Wire Reel Assembly for 50-60 lb. Coils
(without high frequency insulation).
K162-1
Spindle Kit, 2 Inch Hub
K29
Vertical Lift Adjuster (4")
K96
Horizontal Adjuster (2")
K278-1
Spreadarc
™
Oscillator
K310
Flux Screen with Air-Driven Vibrator
K58
Magnetic Flux Screen Separator
K2462-1
Power Feed
™
10A Mounting Bracket
—
Fume Extraction System
Automatic Wire Feeders
www.lincolnelectric.com/wire-feeders
81