Lincoln Electric AC-225C - Manual (Page 133)

Consumables
www.lincolnelectric.com/welding-consumables
Electrode Hardness General
Name Rockwell C Description
Build-Up
Lincore ® BU 85-95 Rb For rebuilding worn parts to near final size before applying final hardfacing layer(s), which
is more wear resistant. Use on carbon, low alloy steels.
Lincore ® BU-G 20-35 Rc Gas-shielded cored wire for build-up of mild steel and low alloy steel parts to bring them to
30-42 (1) Rc final dimensions, or for metal-to-metal wear.
Lincore ® 33 28-34 Rc For build-up prior to hardfacing. Use on carbon and low alloy steels. Can be used under 802,
803, 880M flux.
Metal-To-Metal Wear
Lincore ® 40-O 40-45 (1) Rc Bridges the hardness gap between Lincore ® 33 and Lincore ® 55.
Lincore ® 55 56-62 (1) Rc Hardfacing overlay to resist rolling, sliding, and metal-to-metal wear. For carbon, low alloy,
and manganese steels. Can be used under 802, 803, 880M flux.
Lincore ® 55-G 48-60 Rc Gas-shielded cored wire. Martensitic low alloy steel deposit for resistance to metal-to-metal
wear. Despite the high hardness, crack-free deposits can be obtained with proper preheat,
interpass temperature control, and post-weld cooling.
Lincore ® T&D 48-65 Rc For rebuilding tools and dies and for putting tool steel surface on carbon and low alloy steels.
Severe Impact
Lincore ® 40-50 (1) Rc Self-shielded, cored wire. High alloy austenitic manganese composition for resistance to
Frogmang ® severe impact. Ideal for rebuilding worn manganese rail frogs, diamonds and switches.
Lincore ® M 40-48 (1) Rc Produces austenitic manganese steel deposit. Rebuild/join manganese steel. Limit interpass
to 500°F.
Lincore ® M-1 43 (1) Rc This self-shielded, flux-cored wire is recommended for the same applications as Lincore M.
However, M-1 produces less slag.
Diameter Package Product
inches Weight Lbs. Number
5/64 25SSP ED031115
5/64 50C ED022064
7/64 50C ED022065
7/64 125D ED022069
.045 25SP ED029079
1/16 25SP ED029080
5/64 56CT(14C) ED011237
.045 25SSP ED031116
1/16 25SSP ED031117
5/64 25SSP ED031118
5/64 50C ED011238
3/32 50C EDS01197
7/64 50C ED011240
7/64 125D ED011239
5/64 25SSP ED031119
5/64 50C ED025907
7/64 50C ED025908
5/64 56CT(14C) ED011277
.045 25SSP ED031120
1/16 25SSP ED031121
5/64 25SSP ED031122
5/64 50C ED011278
7/64 50C ED011280
7/64 125D ED011279
5/64 500D ED028237
.045 25SP ED028176
1/16 25SP ED028177
.045 500AD (20” dia) ED031475
1/16 500AD (20” dia) ED031476
1/16 25SSP ED031134
7/64 50C ED022057
1/16 25SP ED026106
5/64 25SP ED026105
3/32 25SP ED026104
7/64 25SP ED026103
.045 25SSP ED031128
1/16 25SSP ED031129
5/64 25SSP ED031130
5/64 50C ED011160
7/64 50C ED011164
7/64 125D ED011163
7/64 300D ED011161
7/64 600D ED011162
7/64 50C ED031126
7/64 600D ED022060
Hardfacing Flux-Cored Wires
Package Code Key: AD = Accu-Trak ® Drum C = Coil CT = Cardboard Carton D = Speed Feed ® Drum (wire) or Steel Drum (flux)
SP = Plastic Spool SSP = Steel Spool
(1) Hardness range given is work hardened. As-welded range would be significantly lower, typically around 22 Rc.
135