Lincoln Electric AC-225C - Manual (Page 167)

169
www.lincolnelectric.com/mig-guns
Recommended General Options
Welding Guns, con’t.
Fume Extraction & Submerged Arc Guns
169
(See page 92, Environmental Section, for other Fume Extraction attachments and accessories)
FUME EXTRACTION GUNS
Magnum ® Pro 350XA
350 amp capacity at 100%
duty cycle (CO
2
). Delivers
superior fume extraction per-
formance in severe GMAW
and FCAW-GS applications.
Order K2649-1
Magnum ® Pro 550XA
Rated 550 amps at 100% duty
cycle (O
2
shielding). Toughest
smoke gun in the business
for GMAW and FCAW-GS
applications.
Order K2650-1
Magnum ® 250XA
Lightweight and balanced
Fume Extraction Gun for
GMAW and FCAW-GS
welding .035"-045" wire.
250 amps at 60% duty cycle
(CO
2
) with a 45° Gooseneck.
Includes a 15 ft. cable.
Order K566-2
Magnum ® 400XA
Lightweight and balanced
Fume Extraction Gun for
GMAW and FCAW-GS
welding .035"-1/16" wire.
400 amps at 60% duty cycle
(CO
2
) with 45° or a 60°
Gooseneck. Includes a 15 ft.
cable.
Order K556-2 for 45°
Order K556-14 for 60°
Magnum ® 250A Gun
For Innershield ® or Lincore ® .
Rated 250 amps at 60%
duty cycle. Use .068"-3/32"
(1.7-2.4 mm) diameter wires.
62° gun tube angle. Includes
15 ft. cable.
Order K309
Magnum ® 350A Gun
For Innershield ® or Lincore ® .
Rated 350 amps at 60%
duty cycle. Use .062"-3/32"
(1.6-2.4 mm) diameter wires.
62° gun tube angle. Includes
15 ft. cable.
Order K206
Magnum ® 500A Gun
For Innershield ® or Lincore ® .
Rated 500 amps at 60%
duty cycle. Use 5/64"-.120"
(2.0-3.0 mm) diameter wires.
select either 45°or 82° gun
tube angle. Includes 15 ft.
cable.
Order K289-1 for 82° angle
Order K289-4 for 45° angle
FUME EXTRACTION
ACCESSORIES
Magnum ® Pro Spoiler ™
This innovative attachment
relieves hand fatigue by
allowing a looser grip on
the gun. Works with all
Magnum
® Pro models.
Order K2710-1
SUBMERGED ARC GUNS
Magnum ® Submerged Arc
Gun
Rated 600 amps, 15 ft.
(4.5 m) cable.
Order K113-1
for 5/64" (2.0 mm)
Order K113-2
for 3/32" (2.4 mm)
Mechanized SAW Gun
Rated 600 amps, for 5/64
and 3/32" (2.0 and 2.4 mm)
solid electrode. Includes
flux valve interlock switch
and receptacle for Hand
Travel Unit or Squirtmobile
® .
Order K114
SUBMERGED ARC
ACCESSORIES
Flux Cone
Fits K112 and K113 sub-
merged arc guns for welding
without the Continuous Flux
Feed Tank Assembly.
Order K119
Wire Reel and Flux Tank
Assembly
Includes flux tank, undercar-
riage, wire reel and brake
assembly in open shroud.
Order K305
Flux Screen
For submerged arc welding.
Removes large particles from
reused flux. Includes air-driv-
en vibrator.
Order K310
Magnetic Flux Screen
Separator
For submerged arc welding.
Removes foreign magnetic
particles from reused flux.
Order K58