Siemens SIMATIC NET PROFIBUS User Manual
Page 477
References
I-3
PROFIBUS Networks SIMATIC NET
6GK1970-5CA20-0AA1 Release 2 05/2000
S7–300, M7–300, ET 200M Modules with
Intrinsically Safe Signals
Reference Manual
SIEMENS AG
contained in the “Manual for S7–300 in the EXCi) Area, Installation
Instructions and Module Data Sheets”
Order no. 6ES7 398–8RA00–8BA0
S7–300, M7–300, ET 200M Principles of Intrinsically–Safe Design
Manual
SIEMENS AG
contained in the “Manual for S7–300 in the EXCi) Area, Installation
Instructions and Module Data Sheets”
Order no. 6ES7 398–8RA00–8BA0
Further Information
You will find further information on the topic of intrinsic safety and explosion
protection in:
S
Manual S7-300, M7-300, ET 200M Modules with Intrinsically Safe Signals
(Order no. 6ES7 398-8RA00-8BA0)
S
Untersuchungen zur Eigensicherheit bei Feldbus-Systemen; PTB-Bericht W-53,
Braunschweig, März 1993
S
PROFIBUS-PA Installation Guideline, Technical Guidance for Use of IEC
1158-2 with PROFIBUS–PA, No. 2.091
PROFIBUS User Organization e. V., Haid-und-Neu-Str. 7, D-76131 Karlsruhe,
Germany
Order Numbers
The order numbers of the SIEMENS documentation listed above can be found in
the catalogs SIMATIC NET Industrial Communication, Catalog IK 10” and
”SIMATIC Programmable Controllers SIMATIC S7 / M7 / C7”.
You can order these catalogs and obtain further information and details of available
training courses from your local SIEMENS office or national head office.
-
/14/
/15/