Siemens syngo CT 2005C - Manual (Page 257)

syngo 3D
257
Auto Load in 3D and Post-processing Presets
You can activate the Auto load in 3D function on the
Examination card/Auto Tasking and link it to a recon
job.
On the 3D card you have the possibility to create
Ranges Parallel and Radial protocols which can be
linked to a special series name.
– Select the image type
– Select the orientation
– Open the Range function and adapt the range set-
tings (Image thickness, Distance between the
images etc.)
– Hit the link button
– Save the linked preset
Blow-up Mode
With the blow-up mode you display the full screen for
easier visualization by double-clicking in the segment.
C2-025.630.01.01.02_APPLICATIONGUIDE_SPIRIT.book Page 257 Friday, April 8, 2005 9:55 AM