Siemens syngo CT 2005C - Manual (Page 42)

42
Workflow Information
• Define a protocol as Emergency protocol.
Select the desired scan protocol with the right
mouse button. Select entry “Set as new emergency
protocol”. The selected protocol is marked with a red
cross.
• Change the structure of the protocol tree. You can
sort all Customers protocols as needed. Select the
desired protocols, press right mouse button.
You will find the entries:
– Cut/copy
– Paste
to change the sorting of your protocol tree. You can
also do this easily by dragging and dropping the pro-
tocols under the desired position.
C2-025.630.01.01.02_APPLICATIONGUIDE_SPIRIT.book Page 42 Friday, April 8, 2005 9:55 AM