Siemens syngo CT 2005C - Manual (Page 251)

syngo 3D
251
Using SSD
1. Load the series to SSD.
Hint: Do not use a series with a high resolution ker-
nel, e.g., kernel 10 or 20 is recommended.
2. Manipulate the volume to evaluate anatomy:
a)Orientate the image volume for the best view of
the anatomy.
b)Adjust the threshold as necessary.
c)Pan and zoom image as necessary.
d)To eliminate unwanted structures, use VOI punch-
ing/3D Object Editor.
3. Measure, annotate and document as needed.
4. Optionally, create image series using radial ranges
and output them either on a film or save them to
the database.
Using VRT
1. Load the series to VRT.
2. Manipulate volume to evaluate anatomy:
a)Orientate the image volume for the best view of
the anatomy.
b)To eliminate unwanted structures, either activate
VRT Thin/Clip or use VOI punching/3D Object Edi-
tor.
c)Select a VRT preset from the VRT gallery.
d)Adjust window, opacity, color and lighting effects
as necessary.
e)Pan and zoom image as necessary.
3. Measure, annotate and document as needed.
4. Optionally, create image series using radial ranges
for VRT; parallel, expanded or curved ranges for VRT
Thin/Clip and output them either on a film or save
them to the database.
C2-025.630.01.01.02_APPLICATIONGUIDE_SPIRIT.book Page 251 Friday, April 8, 2005 9:55 AM