Siemens syngo CT 2005C - Manual (Page 261)

syngo Fly Through
261
• Standing Point
– The cone rotates around the viewing point.
• Viewing Point
– The complete cone moves.
• Clipping Point
– The cone rotates around the standing point.
• Viewing Angle
– Is changed by moving one of the sides of the
angle.
• Viewing Distance
– The distance from the standing to the viewing
point.
• Viewing Depth
– Moving the Front/Back Clip Plane changes the
viewing depth.
• Front Clip Plane
– To remove foreground-obscuring tissue. The posi-
tion of the front clip plane will always be between
standing and viewing point.
• Back Clip Plane
– To remove tissue at the back of the volume. The
position of the back clip plane will always be
behind viewing point.
C2-025.630.01.01.02_APPLICATIONGUIDE_SPIRIT.book Page 261 Friday, April 8, 2005 9:55 AM