Slice collimation and slice width for, Spiral mode and hr spiral mode, Sequence mode and hr sequence mode 20 – Siemens syngo CT 2005C User Manual
Page 20: Scan and reconstruction
20
Scan and Reconstruction
Slice Collimation and Slice Width for Spiral Mode
and HR Spiral Mode
Slice Collimation and Slice Width for Sequence
Mode and HR Sequence Mode
1 mm:
1, 1.25, 2, 3, 5 mm
1.5 mm:
2, 3, 5, 6 mm
2.5 mm:
3, 5, 6, 8, 10 mm
4 mm:
5, 6, 8, 10 mm
5 mm:
6, 8, 10 mm
1.0 mm:
1, 2 mm
1.5 mm:
1.5, 3 mm
2.5 mm:
2.5, 5 mm
4.0 mm:
4, 8 mm
5.0 mm
5, 10 mm
C2-025.630.01.01.02_APPLICATIONGUIDE_SPIRIT.book Page 20 Friday, April 8, 2005 9:55 AM