Sierra Wireless Overdrive - Manual (Page 55)

Using Your Device 47
Using Y
our Device
To exit standby mode:
ᮣ
Connect the device to the AC charger or computer, through the USB to Micro B cable.
— or —
Press the power button .
Internet Connection Information
Note: Data usage amounts are approximate and should not be used for billing purposes. For accurate
data usage amounts, check with Sprint.
Click the data icon to display the Internet Connection Information window. The window
displays:
●
Data statistics for the current connection session:
Ⅲ
Data sent
Ⅲ
Data received
Ⅲ
Total transferred
Ⅲ
Session duration
●
The WWAN IP address of the device — the external IP address of the modem [3G or 4G] (that is,
the IP address of the modem as seen from the Internet).
Viewing and Configuring Detailed Internet Connection Information
When you’re logged in, the Internet Connection Information window displays a table showing data
use:
●
In the currently billing cycle. These numbers get automatically reset to 0 on the day selected in
the
Starts on day list.
●
Over the lifetime of the device.
●
By network [3G/4G], and by sent/received/total.
From this window you can:
●
Reset the data usage figures for the current billing cycle. (Click Reset .)
●
Change the start day of the billing cycle (in the Starts on day list).
microSD Card Information and Settings
The text next to the microSD icon ( ) indicates whether the card is:
●
Enabled
●
Detected
●
Accessible by all (“shared”) or only the administrator
●
Accessible with or without a password (security)