Configuring the router tab, Basic panel – Sierra Wireless Overdrive User Manual
Page 104
96 Settings
Section 5J
Configuring the Router Tab
ࡗ
ࡗ
ࡗ
ࡗ
ࡗ
ࡗ
Resetting the Software to Default Settings (page 105)
1.
Log in to the home page.
2.
Click
Advanced settings
(
).
3.
Click
Router
.
4.
Depending on the settings you want to configure, click one of the panels:
Ⅲ
Basic
. See “Basic Panel” on page 96.
Ⅲ
LAN
Ⅲ
Port Forward
. See “Port Forward Panel” on page 101.
Ⅲ
Port Trigger
. See “Port Trigger Panel” on page 103.
Ⅲ
DMZ
. See “DMZ Panel” on page 104.
Basic Panel
To access this panel:
1.
Log in to the home page.
2.
Click
Advanced settings
(
).
3.
Click
Router > Basic
.
From this window, you can enable or disable these features, and perform these actions:
●
Port forwarding
. See “Port Forward Panel” on page 101.
●
Port triggering
. See “Port Trigger Panel” on page 103.
●
DMZ
. See “DMZ Panel” on page 104.
●
UPnP
(universal plug and play). See “UPnP (Universal Plug and Play)” on page 97.
●
SPI
(stateful packet inspection). See “SPI (Stateful Packet Inspection)” on page 97.
●
Router Settings Reset
. See “Resetting the Software to Default Settings (Through the Browser