Motorola CPCI-6115 - Manual (Page 96)

CPCI-6115 CompactPCI Single Board Computer Installation and Use (6806800A68D)
Transition Module Preparation and Installation PMC I/O Module Connectors
94
On the host I/O connectors, a PMC I/O module only uses power, ground and the OUT-going
serial port pins. A host I/O module could potentially use all pins except the OUT-going serial
port.
5.5.2.1 Host IO Connectors
On the PMC I/O connector, pin meaning is defined entirely by the PMC residing on the
host. A host I/O module would not use any pins on this connector.
Table 5-4 PMC I/O Module 1 - Host I/O Connector Pin Assignments, J10
Pin J10 Pin
1 IN1_DCD +12 V 2
3 IN1_RXD IN1_TXD 4
5 +5 V IN1_DTR 6
7 IN1_DSR IN1_RTS 8
9 IN1_CTS +3.3 V 10
11 IN1_RI IN2_DCD 12
13 GND IN2_RXD 14
15 IN2_TXD IN2_DTR 16
17 IN2_DSR GND 18
19 IN2_RTS IN2_CTS 20
21 +5 V IN2_RI 22
23 Not Connected Not Connected 24
25 Not Connected +3.3 V 26
27 Not Connected Not Connected 28
29 GND Not Connected 30
31 Not Connected Not Connected 32
33 Not Connected GND 34
35 Not Connected Not Connected 36
37 +5 V Not Connected 38
39 Not Connected Not Connected 40
41 Not Connected +3.3 V 42
43 Not Connected Not Connected 44
45 GND Not Connected 46