Motorola CPCI-6115 - Manual (Page 40)

CPCI-6115 CompactPCI Single Board Computer Installation and Use (6806800A68D)
Hardware Preparation and Installation J6, Bus Mode Selection
38
2.5.3 J6, Bus Mode Selection
A three-pin header is located on the board to select the correct bus mode operation (60x or
MPX). No jumper or a jumper between pins 2 and 3 allows the board to be in MPX mode. A
jumper placed between pins 1 and 2 enables 60x mode.
Figure 2-3 Switch and Jumper Locations
J17 J16
J98
J99 J6
SW1
U32 U36
J15 J10 J9
U22
SW2
J20
J25
Figure 2-4 Jumper Setting for J6