Version – FUJITSU SPARC ENTERPRISE M9000 User Manual
Page 545
![background image](/manuals/105172/545/background.png)
version(8)
System Administration
521
NAME
version - display firmware version
SYNOPSIS
version
-c xcp [-v] [-t]
version
-c {cmu | xscf} [-v]
version
-h
DESCRIPTION
The version(8) command displays firmware version.
The following versions can be displayed:
Privileges
You must have platadm or fieldeng privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS
The following options are supported:
EXAMPLES
EXAMPLE 1
Displays the XCP version.
xcp
The comprehensive version of the XSCF control package (XCP)
firmware currently applied to the system.
cmu
The version of OpenBoot PROM firmware.
xscf
The version of XSCF firmware.
-c
xcp
Displays the XCP version.
-c
cmu
Displays the version of OpenBoot PROM firmware.
-c
xscf
Displays the version of XSCF firmware.
-h
Displays usage statement. When used with other options or
operands, an error occurs.
-t
Displays information of the XCP version that is registered in the
XSCF. This option is used together with "-c xcp".
-v
Displays detailed information. Specifying this option with "-c
xscf
" displays the same information as the usual information.
XSCF>
version -c xcp
XSCF#0 (Active)
XCP0 (Current): 1090
XCP1 (Reserve): 1090