FUJITSU SPARC ENTERPRISE M9000 - Manual (Page 37)

addcodactivation(8)
System Administration 13
NAME addcodactivation - add a Capacity on Demand (COD) activation key to the COD
Hardware Activation database
SYNOPSIS addcodactivation key_signature
addcodactivation -h
DESCRIPTION addcodactivation (8) adds the specified COD activation key to the COD
Hardware Activation database on the Service Processor.
This command is not available on the M3000 server.
When the key is added, the quantity of headroom is reduced by the quantity
provided by the key. The quantity of headroom cannot be lower than 0.
Note – Before you run this command, you must obtain a key. To obtain a key,
contact your sales representative. For details on COD keys, refer to the SPARC
Enterprise M4000/M5000/M8000/M9000 Servers Capacity on Demand (COD) User’s
Guide.
Privileges You must have platadm privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
OPERANDS The following operand is supported:
EXAMPLES EXAMPLE 1 Adding a Key
EXIT STATUS The following exit values are returned:
SEE ALSO SPARC Enterprise M4000/M5000/M8000/M9000 Servers Capacity on Demand (COD)
User’s Guide
-h Displays usage statement.
When used with other options or operands, an error occurs.
key_signature Specifies the key to be added to the COD database.
XSCF> addcodactivation \
01:84000000:104:0301010100:3:00000000:xxxxxxxxxxxxxxxxxxxxxx
0 Successful completion.
>0 An error occurred.