FUJITSU SPARC ENTERPRISE M9000 - Manual (Page 495)

showshutdowndelay(8)
System Administration 471
NAME showshutdowndelay - display the shutdown wait time at power interruption of the
uninterruptible power supply (UPS)
SYNOPSIS showshutdowndelay
showshutdowndelay -h
DESCRIPTION The showshutdowndelay(8) command displays the wait time before the start of
system shutdown for when power interruption occurs in a system connected to the
UPS.
The time set by the setshutdowndelay(8) command is displayed. The default
time set is 10 seconds.
Privileges You must have one of the following privileges to run this command:
platadm , platop, domainadm, domainmgr, domainop, fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
EXAMPLES EXAMPLE 1 Displays the wait time before the start of shutdown.
EXIT STATUS The following exit values are returned:
SEE ALSO setshutdowndelay(8)
-h Displays usage statement.
XSCF> showshutdowndelay
UPS shutdown wait time : 600 second(s)
0 Successful completion.
>0 An error occurred.