FUJITSU SPARC ENTERPRISE M9000 - Manual (Page 367)

showcodactivation(8)
System Administration 343
NAME showcodactivation - display the current Capacity on Demand (COD) activation
permits stored in the COD Hardware Activation database
SYNOPSIS showcodactivation [-r] [-v]
showcodactivation -h
DESCRIPTION showcodactivation (8) displays information stored in the COD Hardware
Activation database.
This command is not available on the M3000 server.
When used without options this command displays the current COD keys.
Note – For details on COD keys, refer to the SPARC Enterprise M4000/M5000/
M8000/M9000 Servers Capacity on Demand (COD) User’s Guide.
Privileges You must have platadm or platop privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
EXTENDED
DESCRIPTION
The showcodactivation(8) command displays the following information:
-h Displays usage statement.
When used with other options or operands, an error occurs.
-r Displays COD permit information in the raw permit-signature
format, as stored in the COD database.
-v Specifies verbose output. Displays both the formatted COD permit
information and raw permit-signature data.
Description Type of resource (processor).
Ver Version number of the permit, which is always set to 01.
Expiration Expiration of the permit.
Count Number of permits granted for the given resource.
Status GOOD , which indicates that the given resource is valid, or
EXPIRED , which indicates that the resource permit is no longer
valid.