FUJITSU SPARC ENTERPRISE M9000 User Manual

Page 168

restoredefaults(8)

144

SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

XSCF will be automatically rebooted. Afterwards, XSCFU will be
initialized.

Continue?[yes/no](default no):

yes

The NVRAM setting of XSCFU#0 was completed.

XSCF shutdown request was completed.

....XSCF reboot..

***** WARNING *****

XSCF initialization terminate for XSCF/OPNL data clear.

execute "setdefaults factory" (AUTO)

setdefaults : FACTORY mode clear : start

setdefaults : FACTORY mode clear : DBS start

setdefaults : FACTORY mode clear : wait 20s for DBS initialization

initialize OPNL SEEPROM 1/6 -- complete

...

initialize OPNL SEEPROM 6/6 -- complete

setdefaults : FACTORY mode clear : OPNL reset complete

setdefaults : FACTORY mode clear : restore SYSTEM-ID data complete

setdefaults : FACTORY mode clear : /bin/rm /var/log/lastlog >/dev/null
2>&1

setdefaults : FACTORY mode clear : /bin/rm /var/log/boot.log >/dev/null
2>&1

...

setdefaults : FACTORY mode clear : /bin/rm /hcpcommon/tmp/
panel_up_to_date_fail >/dev...

setdefaults : FACTORY mode clear : log data clear complete

setdefaults : FACTORY mode clear : NVRAM(PAGE#0) clear complete

...

setdefaults : FACTORY mode clear : NVRAM(PAGE#7) clear complete

setdefaults : FACTORY mode clear : NVRAM reset complete

...

setdefaults : FACTORY mode clear : unmount filesystem start

dbs[283]: NOTICE: received signal: 15

setdefaults : FACTORY mode clear : unmount /hcp0/linux

...

setdefaults : FACTORY mode clear : unmount /hcpcommon/firmtmp -- complete

setdefaults : FACTORY mode clear : unmount filesystem complete

Please stand by while rebooting the system.

Restarting system.

XSCF uboot 01950000 (Apr 15 2007 - 11:08:18)

SCF board boot factor = 4040

DDR Real size: 512 MB

DDR: 480 MB

XSCF BOOT STOP (recover by NFB-OFF/ON)