beautypg.com

Applynetwork – FUJITSU SPARC ENTERPRISE M9000 User Manual

Page 45

background image

applynetwork(8)

System Administration

21

NAME

applynetwork - apply XSCF network information to the XSCF

SYNOPSIS

applynetwork

[ [-q] -{y|n}] [-M]

applynetwork

-h

DESCRIPTION

applynetwork

(8) command applies XSCF network information that has been set

to the XSCF.

Setting network information on XSCF is a three-step process:

1. Set the information with the following commands:

sethostname(8) - Set XSCF host name and a DNS domain name

setnameserver(8) - Set a DNS server name and a DNS search path

setnetwork(8) - Set IP address and netmask of XSCF network interface

setroute(8) - Set routing information of XSCF network interface

2. Execute the applynetwork(8) command to apply the settings to XSCF.

3. Execute the rebootxscf(8) command to make the changes to the XSCF
permanent.

Note – If XSCF is reset without executing the applynetwork(8) command,
network information that is set is not applied in XSCF. Also, information that is set
is deleted.

Privileges

You must have platadm privileges to run this command.

Refer to setprivileges(8) for more information.

OPTIONS

The following options are supported:

EXTENDED

DESCRIPTION

When the command is executed, a prompt to confirm execution of the command
with the specified options is displayed. Enter "y" to execute the command or "n"
to cancel the command.

Use the appropriate network commands to specify the following settings, then
execute the applynetwork(8) command. All these settings must be present and
proper or the XSCF network settings will not be applied.

-h

Displays usage statement. When used with other options or
operands, an error occurs.

-M

Displays text by page.

-n

Automatically answers "n" (no) to all prompts.

-q

Suppresses all messages to stdout, including prompts.

-y

Automatically answers "y" (yes) to all prompts.