FUJITSU SPARC ENTERPRISE M9000 - Manual (Page 50)

applynetwork(8)
26 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2010
EXAMPLE 3 Applies the information that has been set for the XSCF network. Suppresses
prompts, and automatically answers "y" to all prompts.
EXAMPLE 4 Sets the name server and the search path and then applies the XSCF network
settings.
Please confirm that the settings have been applied by executing
showhostname, shownetwork, showroute and shownameserver after rebooting
the XSCF.
XSCF> applynetwork -q -y
XSCF> applynetwork
The following network settings will be applied:
xscf#0 hostname :hostname-0
DNS domain name :example.com
nameserver :10.23.4.3
nameserver :10.24.144.3
nameserver :10.24.131.7
search :example1.com
search :example2.com
search :example3.com
search :example4.com
search :example5.com
interface :xscf#0-lan#0
status :up
IP address :10.24.144.214
netmask :255.255.255.0
route :-n 0.0.0.0 -m 0.0.0.0 -g 10.24.144.1
interface :xscf#0-lan#1
status :down
IP address :
netmask :
route :