FUJITSU SPARC ENTERPRISE M9000 - Manual (Page 330)

settimezone(8)
306 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
-p offset Specifies the offset of Daylight Saving Time and Greenwich mean
time (GMT). Specify this option in combination with "-c
adddst.
" In case omitted, it is 1 hour ahead of the offset time
that specified using the -o option. You can specify offset in the
following format.
GMT {+|–}hh[:mm[:ss]]
GMT Greenwich mean time
{+|–} Specifies "–" to set the standard time to the
time which is ahead of GMT. (To adjust to the
local time east to Greenwich, the offset is a
negative value.)Specifies "+" to set the
standard time to the time which is behind the
GMT. (To adjust to the local tome west to
Greenwich, the offset is a positive value.)
hh[:mm[:ss]] Specifies the offset time. hh is 00–23, mm is
00
–59, ss is 00–59.
-s timezone Specifies the time zone. Specify this option in combination with
"-c settz." One of the time zone displayed by the -a option can
be specified for timezone.