FUJITSU SPARC ENTERPRISE M9000 User Manual
Page 148
rebootxscf(8)
124
SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised February 2010
■
By using the rebootxscf(8) command, you can reset XSCF while the domain is
in operation. However, if you set up XSCF to serve as the upper NTP server of
the domain, time lag may arise between XSCF and the domain. In such a case,
adjust the domain time so that XSCF and the domain will be synchronized.
EXAMPLES
EXAMPLE 1
Resets the XSCF.
EXAMPLE 2
Resets the XSCF. Automatically replies with
"
y
"
to the prompt.
EXAMPLE 3
Resets the XSCF. Automatically replies with
"
y
"
without displaying the
prompt.
EXAMPLE 4
Cancels the rebootxscf(8) command execution that is in progress.
EXIT STATUS
The following exit values are returned:
SEE ALSO
applynetwork(8)
, setaltitude(8), setdualpowerfeed(8), sethttps(8), setntp(8),
setssh(8)
, settelnet(8)
XSCF>
rebootxscf
The XSCF will be reset. Continue? [y|n]:
y
XSCF>
rebootxscf -y
The XSCF will be reset. Continue? [y|n]:
y
XSCF>
rebootxscf -q -y
XSCF>
rebootxscf
The XSCF will be reset. Continue? [y|n]:
n
XSCF>
0
Successful completion.
>0
An error occurred.