FUJITSU SPARC ENTERPRISE M9000 User Manual
Page 402
showdomainstatus(8)
378
SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
Refer to setprivileges(8) for more information.
OPTIONS
The following options are supported.
EXAMPLES
EXAMPLE 1
Displays status information on all domains.
EXIT STATUS
The following exit values are returned:
SEE ALSO
poweroff(8)
, poweron(8), reset(8), showdcl(8)
Can run this command for all domains.
domainadm
, domainmgr, domainop
Can run this command only for your accessible domains.
-a
Displays status information on all domains that can be accessed.
-d
domain_id
Specifies only one ID of the domain to be displayed. domain_id
can be 0–23 depending on the system configuration.
-h
Displays usage statement. When used with other options or
operands, an error occurs.
XSCF>
showdomainstatus -a
DID Domain Status
00 Running
01 Running (Waiting for OS Shutdown)
02 Powered Off
03 Panic State
04 Shutdown Started
05 Booting/OpenBoot PROM prompt
06 Initialization Phase
07 OpenBoot Execution Completed
0
Successful completion.
>0
An error occurred.