FUJITSU SPARC ENTERPRISE M9000 - Manual (Page 162)

restoreconfig(8)
138 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
EXAMPLE 4 Restoring the Configuration Using USB
EXAMPLE 5
Restoring An Encrypted Configuration
< ETag: "4fa2a-601b-4897602f"
< Accept-Ranges: bytes
< Content-Length: 24603
< Content-Type: text/plain
* Connection #0 to host 10.7.79.18 left intact
* Closing connection #0
done
file decoding done.
Configuration backup created on Mon Aug 4 12:58:19 2008
from system ‘M3000’ with serial number ‘IKS08220xx’, version ‘19830000’
validating backup configuration data
*** You will need to power-cycle the entire system after this operation is
completed
*** Do you want to restore this configuration to your system? [y|n]: y
requesting XSCF reboot to perform restore ... requested
Connection to ghidorah.com closed by foreign host.
XSCF> restoreconfig -V -p 129.145.155.166:8080 file:///media/
usb_msd/proxytest.cfg
transfer from ’/scf/firmtmp/hcp/config/config_file.bin’ to ’file:///media/
usb_msd/proxytest.cfg’
Configuration backup created on Mon Aug 4 14:38:27 2008
from system ’M3000’ with serial number ’IKS08220xx’, version ’19830000’
*** You will need to power-cycle the entire system after this operation is
completed
*** Do you want to restore this configuration to your system? [y|n]: y
requesting XSCF reboot to perform restore ... requested
Connection to ghidorah.com closed by foreign host.
XSCF> restoreconfig -v -V -P encryption http://10.7.79.18/sollgell/
proxytest.cfg
obtaining lock ... done
initiating file transfer from ’http://10.7.79.18/sollgell/proxytest.cfg’