FUJITSU SPARC ENTERPRISE M9000 User Manual
Page 30
Intro(8)
6
SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised July 2010
showlookup
display the configuration for authentication and privileges
lookup
showmonitorlog
display the contents of monitoring messages in real time
shownameserver
display the registered domain name system (DNS) servers
and the DNS search paths specified on the XSCF network
shownetwork
display information of network interfaces for XSCF
shownotice
display copyright and license information for the copyright
information for eXtended System Control Facility (XSCF)
Control Package (XCP)
showntp
display the NTP servers currently set for the XSCF network
showpacketfilters
show the IP packet filtering rules that are set in the XSCF
network
showpasswordpolicy
display the current password settings
showpowerupdelay
display the current settings for the warm-up time of the
system and wait time before system startup
showresult
display the exit status of the most recently executed
command
showroute
display routing information for an XSCF network interface
showshutdowndelay
show the shutdown wait time at power interruption of the
uninterruptible power supply (UPS)
showsmtp
display the Simple Mail Transfer Protocol (SMTP)
configuration information
showsnmp
display the configuration information and current status of
the SNMP agent
showsnmpusm
display the current User-based Security Model (USM)
information for the SNMP agent
showsnmpvacm
display the current View-based Access Control Access
(VACM) information for the SNMP agent
showssh
display the settings of the Secure Shell (SSH) service that
configured for the XSCF network
showstatus
display the degraded Field Replaceable Units (FRUs)
showsunmc
show setup information and status of Sun Management
Center agent
showtelnet
display the current status of the telnet service for the XSCF
network