FUJITSU SPARC ENTERPRISE M9000 - Manual (Page 377)

showconsolepath(8)
System Administration 353
NAME showconsolepath - displays information on the domain console that is currently
connected
SYNOPSIS showconsolepath -a
showconsolepath -d domain_id
showconsolepath -h
DESCRIPTION The showconsolepath(8) command displays information on the domain console
that is currently connected.
The following information can be displayed:
Privileges You must have one of the following privileges to run this command:
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported.
User User account of the XSCF connected to the domain console
DID Domain ID
ro/rw Domain console type
ro Read-only console
rw Writable console
escape Escape mark specified for the console
Date Date connected to the domain console
useradm , platadm, platop
Can run this command for all domains.
domainadm , domainmgr, domainop
Can run this command only for your accessible domains.
-a Displays console information on all domains that can be
accessed.
-d domain_id Specifies only one ID of the domain for which information is to
be displayed. domain_id can be 0–23 depending on the system
configuration.
-h Displays usage statement. When used with other options or
operands, an error occurs.