FUJITSU SPARC ENTERPRISE M9000 - Manual (Page 205)

setdcl(8)
System Administration 181
-r Clears the XSB number associated with an LSB number in the
specified domain. On the M3000 server, you cannot specify this
option.
-s option=value Makes settings regarding hardware resources of the XSB
associated with an LSB. An item to be set is specified for option,
and a value corresponding to option is specified for value. option
and value are specified only once in a format using an equal sign
(=) to delimit the specified values. The space character must not
be inserted immediately before and after "=".
One of the following can be specified for option. On the M3000
server, only policy can be specified.
policy Degradation range applicable for a detected
error during an initial diagnosis of hardware.
no-mem Whether to omit the use of memory on a
domain
no-io Whether to omit the use of I/O devices on a
domain
float Whether to set a priority for the board as a
floating board, relative to other boards
If policy is specified for option, either of the following can be
specified for value:
fru Degrades the target Field Replaceble Unit
(FRU) for an error detected by a diagnosis.
xsb Degrades the target XSB for an error detected
by a diagnosis.
system Stops the target domain for an error detected
by a diagnosis.
If no-mem is specified for option, either of the following can be
specified for value:
true Omits the use of memory on a domain.
false Does not omit the use of memory on a
domain (default).