FUJITSU SPARC ENTERPRISE M9000 - Manual (Page 471)

shownetwork(8)
System Administration 447
NAME shownetwork - display information of network interfaces for XSCF
SYNOPSIS shownetwork [-M] {-a | -i | interface}
shownetwork -h
DESCRIPTION shownetwork (8) command displays current information of network interfaces for
XSCF.
Information on the specified network interface or all the network interfaces can be
displayed. The following information is displayed:
Privileges You must have one of the following privileges to run this command:
useradm , platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop , fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
xscf# x-y XSCF network interface name
HWaddr MAC address (hexadecimal notation)
inet addr IP address
Bcast Broadcast
Mask Netmask
UP/DOWN Whether the network interface is enabled
-a Displays information for all XSCF network interfaces.
-h Displays usage statement. When used with other options or
operands, an error occurs.
-M Displays text by page. This option provides a function that is the
same as that of the more command.